Land Rover Defender 110 Information & Upgrade Guide
The 110 has the broadest classic Defender body and payload range, including station wagon, hard top, high-capacity pick-up and chassis cab derivatives.
Model Overview
Land Rover Defender 110 Model Years Explained
The 110 has the broadest classic Defender body and payload range, including station wagon, hard top, high-capacity pick-up and chassis cab derivatives.
1983–1990 One TenPre-Defender One Ten.
1990–1998 Defender200Tdi and 300Tdi era.
1998–2007 Td5Five-cylinder Td5.
2007–2011 2.4 TDCiPuma-era Defender.
2012–2016 2.2 TDCiFinal classic Defender 110.
Important: Registration dates can overlap build changes. Always check the VIN, build date, engine, transmission, body style and fitted equipment before ordering model-specific parts.
Technical Data
Land Rover Defender 110 Quick Specification Table
This UK-focused table gives the main fitment and capability points useful when planning upgrades. Exact limits remain vehicle and model-year dependent.
| Specification | UK / Relevant Information |
|---|---|
| UK / relevant model groups | 1983–1990 One Ten; 1990–1998 Defender; 1998–2007 Td5; 2007–2011 2.4 TDCi; 2012–2016 2.2 TDCi |
| Main engines | 200Tdi, 300Tdi, Td5, 2.4 TDCi and 2.2 TDCi are the key later UK engines. |
| Braked towing | Typically up to 3,500kg braked on many later 110 variants; check plate. |
| Wading depth | Commonly around 500mm in standard form. |
| Wheel fitment | 5x165.1 on classic Defender. |
| Suspension | Coil-sprung live axles front and rear. |
| Vehicle construction | Body-on-frame / ladder-frame utility 4x4. |
Towing, payload, roof load, wheel torque and wading figures must be confirmed against the exact vehicle handbook, compliance plate and accessory instructions. Imported vehicles can differ from UK-supplied specification.
Engine Information
Defender 110 Engine Model Years, Oil & Service Information
Engine families can overlap registration years, so use the VIN or engine code when selecting oil, filters or engine-specific components. Devon 4x4 also supplies Land Rover service and maintenance parts; match consumables by VIN, engine and build date.
| Model Group | Main Engines | Identification | Oil / Service Guidance |
|---|---|---|---|
| 1983–1990 One Ten | 200Tdi, 300Tdi, Td5, 2.4 TDCi and 2.2 TDCi are the key later UK engines. | Confirm engine code / VIN before ordering engine-specific parts or fluids. | Use the manufacturer approval and viscosity stated for the exact engine and model year. |
| 1990–1998 Defender | 200Tdi, 300Tdi, Td5, 2.4 TDCi and 2.2 TDCi are the key later UK engines. | Confirm engine code / VIN before ordering engine-specific parts or fluids. | Use the manufacturer approval and viscosity stated for the exact engine and model year. |
| 1998–2007 Td5 | 200Tdi, 300Tdi, Td5, 2.4 TDCi and 2.2 TDCi are the key later UK engines. | Confirm engine code / VIN before ordering engine-specific parts or fluids. | Use the manufacturer approval and viscosity stated for the exact engine and model year. |
| 2007–2011 2.4 TDCi | 200Tdi, 300Tdi, Td5, 2.4 TDCi and 2.2 TDCi are the key later UK engines. | Confirm engine code / VIN before ordering engine-specific parts or fluids. | Use the manufacturer approval and viscosity stated for the exact engine and model year. |
| 2012–2016 2.2 TDCi | 200Tdi, 300Tdi, Td5, 2.4 TDCi and 2.2 TDCi are the key later UK engines. | Confirm engine code / VIN before ordering engine-specific parts or fluids. | Use the manufacturer approval and viscosity stated for the exact engine and model year. |
Oil capacities and approvals vary by engine code, sump, emissions equipment and service procedure. Use current manufacturer data for the exact vehicle rather than a generic internet figure.
Suspension
Defender 110 Suspension & Load Carrying
Coil-sprung live axles front and rear.
Spring and damper selection should account for permanent bumper and winch weight, underbody protection, roof equipment, drawers, tools, towing load and normal passenger/cargo use. A suspension lift does not automatically increase the vehicle's plated GVW or axle ratings.
Roof Systems
Roof Load, Roof Racks, Awnings & Roof Tents
Roof-load limits can differ by body style, roof construction, factory rails and mounting system. Treat the vehicle's dynamic roof rating as separate from any static rating quoted by a rack or tent manufacturer.
The combined weight of mounting feet, bars, platform, tent, awning and cargo must stay within the lowest-rated component. Off-road use may also require a lower working load than sealed-road use.
Touring & Storage
Payload, Touring Load & Storage
Defender 110 payload varies by body, trim, drivetrain, accessories and model year. Bumpers, winches, drawer systems, roof racks, tents, auxiliary batteries, passengers and trailer nose weight all consume available payload. Use the vehicle plate and actual vehicle weight rather than assuming a catalogue maximum applies to every vehicle.
Touring builds should be planned as a complete system so axle loads, suspension, roof load and towing nose weight remain within the vehicle limits.
Wheel Fitment
Wheels, Tyres, PCD & Fitment
5x165.1 on classic Defender.
Matching the bolt pattern alone does not guarantee fitment. Check centre bore, offset, wheel width, brake clearance, spoke shape, wheel load rating, tyre size and suspension clearance for the exact vehicle.
Defender 110 Wheels & Tyre Equipment
Recovery
Front Bumpers, Winch Mounts & Recovery Points
Recovery equipment must be matched to the exact chassis, body and model year. Factory transport or tie-down points should not automatically be treated as rated recovery points.
On later vehicles, front radar, cameras, parking sensors, cooling airflow and driver-assistance calibration must be considered before fitting a bumper or discreet winch mount.
Wading
Wading Depth, Snorkels & Raised Air Intakes
Commonly around 500mm in standard form.
A snorkel raises the engine air intake but does not waterproof the vehicle. Axle, transmission and transfer-case breathers, door seals, electronics, current, water depth and post-wading inspection all remain important.
Defender 110 Snorkel & Recovery Products
Protection
Chassis, Underbody Protection & Vehicle-Specific Fitment
The 110 has the broadest classic Defender body and payload range, including station wagon, hard top, high-capacity pick-up and chassis cab derivatives.
Protection must match the engine, transmission, transfer case, fuel tank, exhaust and chassis layout. Added protection also consumes payload and can affect service access and cooling.
Land Rover Defender 110 FAQ
What years does this Defender 110 guide cover?
1983–1990 One Ten; 1990–1998 Defender; 1998–2007 Td5; 2007–2011 2.4 TDCi; 2012–2016 2.2 TDCi.
What engines were fitted?
200Tdi, 300Tdi, Td5, 2.4 TDCi and 2.2 TDCi are the key later UK engines.
How much can a Defender 110 tow?
Typically up to 3,500kg braked on many later 110 variants; check plate. Always confirm the exact vehicle plate, towbar approval and gross train weight.
What is the Defender 110 wading depth?
Commonly around 500mm in standard form.
What wheels fit a Defender 110?
5x165.1 on classic Defender. Offset, brake clearance and wheel load rating must also be checked.
Does a suspension lift increase payload?
No. Springs and dampers can better support a permanent load, but they do not by themselves alter the plated GVW, axle limits or legal payload.
Need Help Choosing Defender 110 Parts?
Send Devon 4x4 the model year, engine, transmission, body style and intended use so we can help match suspension, wheels, recovery, roof systems and protection to the correct vehicle.
Contact Devon 4x4