Land Rover Defender L663 Information & Upgrade Guide

The L663 is completely different from the classic Defender and uses modern independent suspension, electronics and ADAS systems.

2020 onwards 90 / 110 2022 onwards 130 2024 onwards performance derivatives
Land Rover Defender L663 technical information and upgrade guide
Model Overview

Land Rover Defender L663 Model Years Explained

The L663 is completely different from the classic Defender and uses modern independent suspension, electronics and ADAS systems.

2020 onwards 90 / 110New-generation Defender launched with multiple petrol/diesel and PHEV powertrains.
2022 onwards 130Extended eight-seat body.
2024 onwards performance derivativesV8 and high-performance versions require model-specific accessory checks.

Important: Registration dates can overlap build changes. Always check the VIN, build date, engine, transmission, body style and fitted equipment before ordering model-specific parts.

Technical Data

Land Rover Defender L663 Quick Specification Table

This UK-focused table gives the main fitment and capability points useful when planning upgrades. Exact limits remain vehicle and model-year dependent.

SpecificationUK / Relevant Information
UK / relevant model groups2020 onwards 90 / 110; 2022 onwards 130; 2024 onwards performance derivatives
Main enginesIngenium diesel and petrol, PHEV, V8 and later performance derivatives depending on model year.
Braked towingUp to 3,500kg on suitable 90/110/130 versions.
Wading depthUp to 900mm on suitably equipped models.
Wheel fitment5x120; brake package can restrict wheel diameter.
SuspensionIndependent suspension front and rear, usually air suspension on higher specifications.
Vehicle constructionGeneration dependent; check the exact model before ordering chassis-mounted accessories.
Towing, payload, roof load, wheel torque and wading figures must be confirmed against the exact vehicle handbook, compliance plate and accessory instructions. Imported vehicles can differ from UK-supplied specification.
Engine Information

Defender L663 Engine Model Years, Oil & Service Information

Engine families can overlap registration years, so use the VIN or engine code when selecting oil, filters or engine-specific components. Devon 4x4 also supplies Land Rover service and maintenance parts; match consumables by VIN, engine and build date.

Model GroupMain EnginesIdentificationOil / Service Guidance
2020 onwards 90 / 110Ingenium diesel and petrol, PHEV, V8 and later performance derivatives depending on model year.Confirm engine code / VIN before ordering engine-specific parts or fluids.Use the manufacturer approval and viscosity stated for the exact engine and model year.
2022 onwards 130Ingenium diesel and petrol, PHEV, V8 and later performance derivatives depending on model year.Confirm engine code / VIN before ordering engine-specific parts or fluids.Use the manufacturer approval and viscosity stated for the exact engine and model year.
2024 onwards performance derivativesIngenium diesel and petrol, PHEV, V8 and later performance derivatives depending on model year.Confirm engine code / VIN before ordering engine-specific parts or fluids.Use the manufacturer approval and viscosity stated for the exact engine and model year.
Oil capacities and approvals vary by engine code, sump, emissions equipment and service procedure. Use current manufacturer data for the exact vehicle rather than a generic internet figure.
Defender L663 suspension and lift kits
Suspension

Defender L663 Suspension & Load Carrying

Independent suspension front and rear, usually air suspension on higher specifications.

Spring and damper selection should account for permanent bumper and winch weight, underbody protection, roof equipment, drawers, tools, towing load and normal passenger/cargo use. A suspension lift does not automatically increase the vehicle's plated GVW or axle ratings.

Defender L663 roof racks and roof tents
Roof Systems

Roof Load, Roof Racks, Awnings & Roof Tents

Roof-load limits can differ by body style, roof construction, factory rails and mounting system. Treat the vehicle's dynamic roof rating as separate from any static rating quoted by a rack or tent manufacturer.

The combined weight of mounting feet, bars, platform, tent, awning and cargo must stay within the lowest-rated component. Off-road use may also require a lower working load than sealed-road use.

Defender L663 load & touring and storage
Touring & Storage

Payload, Touring Load & Storage

Defender L663 payload varies by body, trim, drivetrain, accessories and model year. Bumpers, winches, drawer systems, roof racks, tents, auxiliary batteries, passengers and trailer nose weight all consume available payload. Use the vehicle plate and actual vehicle weight rather than assuming a catalogue maximum applies to every vehicle.

Touring builds should be planned as a complete system so axle loads, suspension, roof load and towing nose weight remain within the vehicle limits.

Defender L663 wheels tyres PCD and fitment
Wheel Fitment

Wheels, Tyres, PCD & Fitment

5x120; brake package can restrict wheel diameter.

Matching the bolt pattern alone does not guarantee fitment. Check centre bore, offset, wheel width, brake clearance, spoke shape, wheel load rating, tyre size and suspension clearance for the exact vehicle.

Defender L663 winch bumpers recovery points and winch mounts
Recovery

Front Bumpers, Winch Mounts & Recovery Points

Recovery equipment must be matched to the exact chassis, body and model year. Factory transport or tie-down points should not automatically be treated as rated recovery points.

On later vehicles, front radar, cameras, parking sensors, cooling airflow and driver-assistance calibration must be considered before fitting a bumper or discreet winch mount.

Defender L663 snorkels wading and raised air intakes
Wading

Wading Depth, Snorkels & Raised Air Intakes

Up to 900mm on suitably equipped models.

A snorkel raises the engine air intake but does not waterproof the vehicle. Axle, transmission and transfer-case breathers, door seals, electronics, current, water depth and post-wading inspection all remain important.

Defender L663 underbody protection and rock sliders
Protection

Chassis, Underbody Protection & Vehicle-Specific Fitment

The L663 is completely different from the classic Defender and uses modern independent suspension, electronics and ADAS systems.

Protection must match the engine, transmission, transfer case, fuel tank, exhaust and chassis layout. Added protection also consumes payload and can affect service access and cooling.

Land Rover Defender L663 FAQ

What years does this Defender L663 guide cover?

2020 onwards 90 / 110; 2022 onwards 130; 2024 onwards performance derivatives.

What engines were fitted?

Ingenium diesel and petrol, PHEV, V8 and later performance derivatives depending on model year.

How much can a Defender L663 tow?

Up to 3,500kg on suitable 90/110/130 versions. Always confirm the exact vehicle plate, towbar approval and gross train weight.

What is the Defender L663 wading depth?

Up to 900mm on suitably equipped models.

What wheels fit a Defender L663?

5x120; brake package can restrict wheel diameter. Offset, brake clearance and wheel load rating must also be checked.

Does a suspension lift increase payload?

No. Springs and dampers can better support a permanent load, but they do not by themselves alter the plated GVW, axle limits or legal payload.

Need Help Choosing Defender L663 Parts?

Send Devon 4x4 the model year, engine, transmission, body style and intended use so we can help match suspension, wheels, recovery, roof systems and protection to the correct vehicle.

Contact Devon 4x4