Britpart - Discovery 2 Heavy Duty Winch Bumper
£374.83 £312.36
DA5645
Brand :
Overview
The Britpart Discovery 2 Heavy Duty Winch Bumper is a one-piece 5mm steel replacement front bumper designed for winches up to 12,000lb. Its wrap-around construction helps protect the front wings, while standard mounting points, provisions for swivel recovery eyes and Hi-Lift jacking points make it a practical upgrade for off-road and recovery use.
| Specification | Details |
|---|---|
| Vehicle | Land Rover Discovery 2 |
| Construction | One-Piece 5mm Steel |
| Winch Capacity | Suitable for Most Winches up to 12,000lb |
| Recovery Points | Provision for 2 Swivel Recovery Eyes |
| Jacking Points | 2 Hi-Lift Jacking Points |
| Mounting | Standard Vehicle Mounting Points |
| Weight | 32kg |
Discovery 2 Heavy Duty Winch Bumper
The Britpart Heavy Duty Winch Bumper is designed specifically for the Land Rover Discovery 2, combining an integrated winch mounting solution with substantial front-end protection for vehicles used for off-road driving and recovery.
Manufactured as a one-piece bumper from 5mm steel, its wrap-around sides extend towards the front wings to provide additional protection while maintaining a purposeful heavy-duty design.
HEAVY DUTY 5MM STEEL CONSTRUCTION
The bumper is manufactured from 5mm steel as a single-piece assembly, providing the strength required for demanding off-road and recovery applications.
WRAP-AROUND WING PROTECTION
Unlike a simple central winch tray, the bumper incorporates wrap-around sides designed to provide additional protection for the Discovery 2's front wings.
WINCH READY DESIGN
The bumper is suitable for most recovery winches rated up to 12,000lb. Specific compatible winches listed for the bumper include the DB12000i, DB9500i and DB9000C.
RECOVERY POINT PROVISIONS
Provision is incorporated for two swivel recovery points, allowing suitable recovery eyes to be installed for off-road recovery applications.
HI-LIFT JACKING POINTS
Two Hi-Lift jacking points are incorporated into the bumper, providing dedicated locations for using a suitable Hi-Lift jack when required off road.
STANDARD MOUNTING POINTS
The bumper attaches using the Discovery 2's standard mounting points, providing a vehicle-specific installation without requiring alternative chassis mounting locations.
INSTALLATION REQUIREMENTS
The vehicle's front grille requires cutting to provide the necessary clearance when installing a winch. Winch dimensions and installation requirements should therefore be checked before fitting.
KEY FEATURES
- Designed for Land Rover Discovery 2
- One-piece heavy-duty construction
- Manufactured from 5mm steel
- Wrap-around sides help protect the front wings
- Suitable for most winches up to 12,000lb
- Compatible with DB12000i, DB9500i and DB9000C winches
- Provision for two swivel recovery points
- Two Hi-Lift jacking points
- Fits to standard vehicle mounting points
- Front grille requires cutting when fitting a winch
- 32kg shipping weight
| SKU | DA5645-BRP |
|---|---|
| Manufacturer | Britpart |
| Vehicle Make | Land Rover |
Write Your Own Review
| Specification | Details |
|---|---|
| Brand | Britpart |
| Vehicle | Land Rover Discovery 2 |
| Application | Front Winch Bumper |
| Construction | One-Piece 5mm Steel |
| Winch Rating | Most Winches up to 12,000lb |
| Listed Winch Compatibility | DB12000i, DB9500i & DB9000C |
| Recovery Points | Provision for 2 Swivel Recovery Eyes |
| Jacking Points | 2 Hi-Lift Jacking Points |
| Mounting | Standard Vehicle Mounting Points |
| Shipping Dimensions | 1800 × 240 × 580mm |
| Shipping Weight | 32kg |
| Installation Note | Front Grille Requires Cutting to Fit Winch |
| Part Number | DA5645 |