Discovery 2 Clutch Hose- Pioneer 4X4
£60.60 £50.50
TD5-CLUTCH-HOSE-DISCOVERY2
Brand :
Overview
Stainless Steel Braided hose to fit TD5 Discovery 2 vehicles, this line connects straight from the master cylinder to the slave cylinder FTC5202
Discovery 2 clutch hydraulics are known to be a pain to bleed due to the routing of the original pipe, this flexible braided hose allows for easy bleeding and routing.
The kit is made from stainless steel fittings and braided stainless steel hose that comes with a Pioneer 4Æ’‚¬4 lifetime warranty as standard.
Discovery 2 Clutch Line Master to Slave
This kit will replace the Discovery 2 Clutch Line directly from the master to the slave, this is for models WITHOUT the decent control switch on the drivers wheel arch. Hand built, custom clutch lines can be supplied, please contact us for more details.What Is Included
- Stainless steel braided brake lines
- Plain stainless steel banjo bolts (if the fittings require them)
- Copper crush washers (if the fittings require them)
- Installation leaflet
- We offer a no-quibble Lifetime Warranty
Specifications
- Line inner material PTFE
- Line outer material Stainless steel (303/304) and protective PVC cover
- Fittings material Stainless steel (303/304)
- Temperature range -70°C to 260°C (-94°F to 500°F)
- Inside diameter 3.5mm (0.138¢¬³)
- Outside diameter 7.5mm (0.295¢¬³)
- Maximum working pressure 290 Bar (4206 PSI)
- Burst pressure 870 Bar (12618 PSI)
- Minimum bend radius 38mm (1.496¢¬³)
| SKU | TD5-CLUTCH-HOSE-DISCOVERY2-LOF |
|---|---|
| Manufacturer | LOF Clutches |
| Vehicle Make | Land Rover |
| Vehicle Model | Discovery |
| Vehicle Series | Discovery 2 |
Write Your Own Review