Hi-lift Jack - 36" Black Cast / Steel

Hi-Lift Jacks
Don't Settle for an Imitation — The Difference is Quality

With over 100 years of quality, the Hi-Lift Jack is a rugged, highly versatile jack that puts you in command of situations requiring lifting, pushing, pulling, winching, and clamping. Although light in weight and easy to maneuver, the Hi-Lift Jack offers a rated capacity of 4,660 lbs (2114 kg) and a tested capacity of 7,000 lbs (3175 kg).

Only Hi-Lift Jacks are made with a two-piece handle and socket design that is built for extended life. Cheaper imitations use a one-piece design that bends easily if lateral pressure is applied while lifting a load.

Hi-Lift jacks are designed to help you survive in the most demanding situations – whether you are in the Moab desert canyons, the Welsh Mountains, the Amazon jungle, or the farmlands of Indiana. With a full-range of specially designed accessories, the Hi-Lift jack is just about the most versatile piece of off-roading/farm/auto recovery equipment you can buy.

When it's a heavy-duty situation, the tool had better be a Hi-Lift!.

Hi-Lift Jack Specifications

• Approximate weight: 30lbs (14 kg)
• 4,660 lbs (2113.74 kg) rated capacity
• Tested capacity 7,000 lbs.
• Climbing pins of specially processed steel with 125,000 PSI tensile strength and 100,000 PSI yield.
• Steel bar is manufactured of specially rolled extra high carbon steel with 80,000 pound minimum tensile & carbon .69 to .82.
• Steel handle of 14gauge high-yield structural tubing with minimum yield of 55,000 PSI. 1 5/16" diameter x 30" long.

Hi-Lift Jack Features

• Every Jack comes complete with an adjustable top clamp/clevis for use in clamping and winching.
• Safety bolt is designed to shear at 7,000 lbs. (3175 kg)
• For speedy disengaging, lifting unit automatically drops away when load is removed.
• 4 1/2" (11cm) long lifting nose for positive contact with load.
• Steel bar can be reversed for extra long life.
• Low pickup of 4 1/2" (11cm).
• 28 square inch base plate.

Hi-Lift Cast/Steel Jack

The cast and steel jack is exactly the same as the all-cast jack except that it has 4 stamped high-strength steel parts. Hi-Lift stamp and form the parts in-house; that allows them to offer the jack at a lower price, yet Hi-Lift still maintain the rigid quality standards that every Hi-Lift product must meet.

• Made of Cast & Stamped Steel Parts.
• 7000lb (3175.14kg) Tested Capacity.
• Features a weld on tube for your trailer which then gives the jack a simple jacking point. Ideal if using more than one jack (with single mounting points)
• Available in 36" (91cm)
• Lifts, Winches, Clamps, & More.