Powerspec Ford Ranger 2.2 Tdci / 3.2 Tdci (11'-≫) T64/65 Clutch Kit

POWERspec Ford Ranger 2.2 TDCi / 3.2 TDCi (2011 onwards) T64/65 Clutch kit FITS ALL 6 SPEED 2.2/3.2 TDCI Ranger 2011 Onwards Perfect for vehicles with a Stage2 map/ Heavy Towing/ Off-roading

• 1x LOF HD Drive plate, fitted with Woven organic 0.4Ž¼ high friction Coefficient
• 1x LOF HD POWERspec clutch cover, +40% Clamp load over original
• 1x LOF TDCI Concentric slave cylinder, Improved design from the Ford Unit
• 6x Clutch cover bolts, coated in loctite
• 1x Ford Pilot/ spigot bearing
• 1x Clutch alignment tool from LOF
• 10ml Spline assembly grease
• 2 year LOF Warranty

Will this fit my vehicle?

• Ford Ranger (2011 onwards) 2.2 TDCi / 3.2 TDCi
• Diameter: 273mm
• Spline: 23 teeth
• OE kit number: 5229596
• OE Cover number: N/A
• OE Plate number: N/A
• OE spigot bearing number: 1096277
• OE Release bearing number: 1468026

Also fits Ford Transit:

• RWD 2.2 TDCi
• 100ps to 155ps
• Factory fitted with single mass flywheel
• 2011 ¢¬‚¬Å“ 2018

If you would like to double check our kit is right for your vehicle, please email us your UK Registration Number or Chassis Number The POWERspec is the next stage up, ideal if you use your Ford Ranger as a work horse. If you tow regularly or carry any extra weight like expedition trucks do then this is the spec for you. Itll handle highly tuned road monsters or hard worked off-roaders all day long. If you want reliability and drivability from your mapped motor the POWERspec will keep you moving forward!     (Pedal Weight not noticeably Heavier than original)